Restringing

RGrizzzz

Administrator
Staff member
Anyone restring crossbows themselves? Strings always seem to break at the worst times. The closest reputable shops to my home are about an hour away. They usually want you to drop it off, so figure 4 hours round trip. I'm considering a Ravin R142 to restring my R10. My brother and I will likely use the press. Thoughts?
 
Yes. I restring myself. It came from compound bows. I used to build my own strings. Crossbows were just being legalized in my state when I bought my last bow-press. I made sure I got one that was adjustable for crossbows.

Having said that, on some new crossbows, you can replace the string without a press. That is true for my Mission Sub-One lite.

I bought my string jig many years ago. It is not adjustable enough to build crossbow strings, so I just buy strings now.

One warning, I always replace my crossbow strings when I see signs of wear. If you string actually broke, you might want to make sure you have no limb damage depending on the situation.
 
Yes. I restring myself. It came from compound bows. I used to build my own strings. Crossbows were just being legalized in my state when I bought my last bow-press. I made sure I got one that was adjustable for crossbows.

Having said that, on some new crossbows, you can replace the string without a press. That is true for my Mission Sub-One lite.

I bought my string jig many years ago. It is not adjustable enough to build crossbow strings, so I just buy strings now.

One warning, I always replace my crossbow strings when I see signs of wear. If you string actually broke, you might want to make sure you have no limb damage depending on the situation.
Mine broke and I had a slick nick in one of the cams. Ravin replaced it under warranty. I originally had the strings changed at about 2.5 years, and it was a hassle.

My brother got a new Center point Helion a few months ago, and decided it's a cheapo. He's going to replace it likely with an R10
 
There is just so much hype about speed of crossbows that is totally useless. That is why I went with mission. There focus is on quiet which ranks much higher on my list than speed.
 
There is just so much hype about speed of crossbows that is totally useless. That is why I went with mission. There focus is on quiet which ranks much higher on my list than speed.
They're nice, but was out of budget. I paid about $1000 less for the R10.
 
Oh, yes, one suggestion if you have not thought about it. Be sure to take pictures of the cams with the old string still on it. While changing a string is not hard, the biggest issue is not putting the new string on the cams correctly.
 
There’s so much emphasis on crossbow speed these days, but in my experience, it’s overhyped and not as important as it seems. That’s why I chose a Mission crossbow, they prioritize quiet operation, which is far more valuable to me than sheer speed.
 
There’s so much emphasis on crossbow speed these days, but in my experience, it’s overhyped and not as important as it seems. That’s why I chose a Mission crossbow, they prioritize quiet operation, which is far more valuable to me than sheer speed.
I can remember when crossbows were first legalized in our state for the general hunting population. I'm a hunter education instructor and we had several crossbow manufactures come in to provide training for the instructors at our advanced training that year. Now this was back when crossbows were only slightly faster than the fastest compound bows. We shot each of the brands at the range. One brand was so loud, it sounded like a .22 when shot.

We asked the manufacturer's representative about it with respect to jumping the string. His response was "Our crossbow is so fast a deer doesn't have time to jump the string." That drew a laugh from the instructors. He was embarrassed that he had to spout the company line to a group of hunter ed instructors that clearly knew better.

When you do the math, you need to get over 1,000 fps before string jumping ceases to be a factor. No crossbow is close to that.

The only thing that speed does is reduce the impact of ranging error. There are many ways to do that. Whitetail hunting is a short range sport. It takes very little interference to deflect an arrow. Beyond about 30 yards, you can not see small twigs that don't have leaves. Under a canopy shots beyond 30 yards are risky. Some guys mistakenly think that because they can hit the bullseye consistently at 50 yards at the range, they can take long shots. Field conditions are much different than at the range. I want to be able to consistently hit the bullseye at 50 yards at the range in order to have confidence at a 30 yard shot in the field.

We can compensate for ranging error by simply flagging at 20 and 30 yards from our stands. Of, if you are using a mobile stand like a climber and want to minimize disturbance, you can simply use a range finder to range trees from your stand an memorize them at the beginning of the hunt before a shot presents itself. Technology is another answer for ranging error for those who can afford it. Several years ago, I bought a Burris OracleX crossbow laser ranging scope. After sighting it in with your crossbow, it stores the ballistic curve for your setup. I simply put the crosshairs on the target and push a button. It ranges the deer, calculates the drop, and illuminates an aiming point on the horizontal crosshair for that distance. I prefer it because there is less movement than trying to deal with a handheld laser ranger in the presence of game.

At 20 yards, the check of a deer can drop 18-20 inches by the time an arrow arrives. I have it on video that I use for our hunter ed classes. The dow drops and the arrow flies over her back. Quiet beats speed hands down!
 
I bought my first ever crossbow last fall. Excalibur 340 Mag. I just swapped a flemish string on it in the basement and do like that about this bow. Upgraded to some 475 grain arrows and anxious to see if noise came down any.
 
I bought my first ever crossbow last fall. Excalibur 340 Mag. I just swapped a flemish string on it in the basement and do like that about this bow. Upgraded to some 475 grain arrows and anxious to see if noise came down any.
Several x-bow makers came to teach crossbow safety to our state Hunter Education instructors when they first became legal in our state as well as to demo their products. The Excalibur sounded like a .22! When asked about string jumping, he regurgitated the company line "Our crossbows are so fast a deer doesn't have time to jump the string". He was immediately laughed off stage by the knowledgeable Hunter Education instructors. He was clearly embarrassed by having to spout that nonsense.

The top criteria I look for in a crossbow for deer is quietness. I have no idea what kind of crossbows Excalibur produces these days. Many companies now make quiet crossbows that don't require a press to swap out strings and cables. Back in the day, the only advantage Excalibur had was the ease of swapping strings in the field.
 
I take 30 yard and under shots with archery tackle. Will do same with the crossbow. And I tend to hold pretty low. Buck this year didn't have time to drop but I'll try to be careful about it.
 
I take 30 yard and under shots with archery tackle. Will do same with the crossbow. And I tend to hold pretty low. Buck this year didn't have time to drop but I'll try to be careful about it.
Deer don't always jump the string depending on their proximity and the character of the sound in ambient conditions, but they ALWAY have time to jump the string. With a fast bow they can drop 18"-22" at 20 yards. Holding low, but still in the kill zone, is a good strategy, but not enough to ensure a kill vs wounding. The more one can quiet the bow the better. Best of luck!
 
Last edited:
Back
Top