yoderjac's latest activity

I had a little back and forth with Humminbird support. They think I may have screwed up some settings. They said I can put the...

I don't do any regulation. I just run the compressor into the tire valve and it makes bubbles. I fill it about 3/4 full and then add...

I took a plastic gas can and put a tire valve in the bottom I glued some plumbing parts to the top. I ran tubing from it to the end of...

I'll have to give that a try. The fish were suspended pretty high today, so I did not try that with my jig. However, I did use a micro...

Yes, I was in a jam one day and could not find foamer for my po boy foamer. It did not work at all. I needed to be on my hands an...

Well, I went fishing today. Some successes and some issues. First, the mod to the pole worked great. The big success was Megalive 2...

I reinflated the chamber this morning. So far, so good, it seems to be holding, but the leak was so slow, it will take me a couple...

Hunting and wildlife management is a hobby for me as well and I suspect, for most on this forum. Some of us dive deeper than others...

Absolutely true. I wouldn't do it myself, but I have heard of guys using a blower to apply lime from the back of a pickup.

I made one more modification today to my Megalive 2 pole. If you recall from previous posts, I did not cement the handle Tee to the...

I decided to try to patch the boat today. I mixed up the Aquaseal and accelerator/cure after marking and cleaning the spot of the leak...

I think I'm making some slow progress. One issue was a bad crimp on the power cable for the ethernet switch. The second issue was a...

I like the way your think! I'm gonna try that one on my wife the next time she thinks I'm spending too much on hobbies!!! 😊

Last time I rented a buggy lime cost me $40/ton

I highlighted the key words in your post. By far the least expensive solution is ag lime. I typically rent a lime buggy from the coop...